2 lb. Stainless Steel Beater
Capacity
Up to 2 pounds of dry fiber/pulp with 14 gallons of water
Beating Adjustment
By turning the hand wheel, the beater roll is precisely raised and lowered over a fixed bedplate.
Roll Construction
Roll has 24 stainless steel blades held in a bronze spool. Blades are replaceable.
Roll diameter: 8′; roll width: 8 3/8′; Blade face width: .187′.
Bedplate
Stainless steel
Tub and Cover
Stainless steel tub with O-shaped midfeather; stainless steel hinged removable roll cover; clear plastic splash / safety guard.
Roll Shaft Seals
Sliding plastic seals are a special feature whose function is to contain water and pulp in the tub where the roll shaft passes through the tub walls.
Motor
1 horsepower, capacitor start; enclosed drip proof case; continuous duty rating; 110 or 220 volt, 50 / 60 HZ, Manual reset overload protection
Bearings
Heavy duty rated ball bearings
Stand
Stainless Steel
Machine Size
Length: 41.5′ Width: 33′ Height: 43′
Features included
Digital roll height indicator
Locking casters
7 lb. Stainless Steel Beater
Capacity
Up to 7 pounds of dry fiber/pulp with 45 gallons of water
Beating Adjustment
Same
Roll Construction
Roll has 42 stainless steel blades held in a bronze spool. Blades are replaceable. Roll diameter: 15 1/2′; roll width: 12′; Blade face width: .187′.
Bedplate
Stainless Steel
Tub and Cover
45 gallon stainless steel tub with O-shaped midfeather; stainless steel hinged removable roll cover; clear plastic splash/safety guard. Sloped floor from backfall to bedplate.
Roll Shaft Seals
Beater has re-packable seal units which allow the seals to be renewed without disassembly of machine
Motor
5 horsepower, single or 3 phase 220 volt, 50 / 60 HZ, Magnetic starter with thermal protection included
Bearings
Heavy duty rated ball bearings
Stand
Aluminum
Machine Size
Length: 57′ Width: 44′ Height: 52′
Options
Digital roll height indicator is included
10 lb. Stainless Steel Beater
Capacity
Up to 10 pounds of dry fiber/pulp with 75 gallons of water
Beating Adjustment
Same
Roll Construction
Roll has 42 stainless steel blades held in a bronze spool. Blades are replaceable.
Roll diameter: 15 1/2′; roll width: 14′; Blade face width: .187′.
Bedplate
Stainless Steel
Tub and Cover
Same as 7 lb machine, but with 75 gallon tub size.
Roll Shaft Seals
Same as 7 lb. machine.
Motor
7 1/2 horsepower, single or 3 phase 220 volt, 50 / 60 HZ, Magnetic starter with thermal protection included
Bearings
Heavy duty rated ball bearings
Stand
Aluminum
Machine Size
Length: 62′ Width:53′ Height:52′
Options
Digital roll height indicator is included